From equipment held in the Media center to resources around the building.
Room Information and Signup
Click on the room number to check its availability.
Please direct all room scheduling questions to TaubmanRoomSchedulers@umich.edu.
There are several co-working offices available for faculty to use who don't have designated working spaces. Please use the scheduling system to reserve an office space.
Special Purpose Spaces
These spaces are reserved for special events and course assignment; the current list of scheduled activities is shown on the calendar. To request use of one of these spaces, contact email@example.com.
Taubman College has circulating equipment available for loan. The Media Center loans out equipment for Taubman College faculty, staff, and students only*. The available equipment is listed below. Faculty and staff reserve equipment through an online reservation system; students, with their MCard, can make reservations in person at the Media Center for the equipment available to them. Please note there are no equipment reservations on weekends.
- Video Projector: InFocus LP650 (1)
- PC Laptops (2)
Students need to leave their student ID when checking out equipment.
Three VLS 6.60 laser systems are located in the west computer lounge, on the 3rd floor. In order to use the VLS 6.60 systems you must go through an orientation with a Lab Assistant. These systems are available for use on a rolling weekly sign up basis. For complete information on the Laser Cutters visit the Digital FabLab section of our website.
The laser cutters are available for use by authorized users 24/7. Laser Assistants are available various hours throughout the week for assistance as needed. To contact one please email firstname.lastname@example.org.
The Makerbot Replicator 2X is a 3D printer that uses ABS plastic to build models up to 9.8"(length) x 6.3"(width) x 5.9"(height) in up to two colors. Similar to the Stratasys printers in material and method of construction it is less expensive to use though not as accurate where specific tolerances are required. The Media Center is offering Makerbot fabrication on a drop-off basis when provided a model that has both the Rhino and .stl versions. Because of the nature of the service, where the length of time per job is just an estimate, the schedule will only show jobs that are running or about to run and can't show when any submitted job will be started or completed. Questions, comments, or concerns can be sent to email@example.com.
There are 11 Multi-Media Carts available to faculty and students 24/7. Three carts use 40" NEC LCD displays, two are 60" LCD displays, and 6 are 55" displays using OLED technology. There are VGA and DVI cables and adapters for displays with those inputs, and HDMI cables and adapters for the OLED displays, to connect your laptop and project your animations, tutorial, drawings, maps, etc. Remote controls are attached to the carts so all you have to do is plug in the monitor, turn it on and connect your laptop!
Review and Lab Spaces
There are several review and lab spaces available for sign-up via our online system. Only faculty and staff can reserve space using this system, students should contact Laura Brown (firstname.lastname@example.org) to reserve a space.
If you have a job that requires the robot, email email@example.com to discuss the application.
Zünd Knife Cutter
The Zünd Knife Cutter is a computer controlled cutting system that can easily cut a number of materials of varying thickness. It is located on the first floor in room 1240, near the Art & Architecture buildings southwest exit. For complete information on the Zünd Knife Cutter visit the Digital FabLab section of our website.